All Categories
  • PE
  • 1621927726665439
  • 1621927726215483
  • PE
  • 1621927726665439
  • 1621927726215483

Jwell High Capacity 710mm - 1200mm PE Pipe Extrusion Machine

Place of Origin:


Brand Name:


Model Number:

JWS90/38; JWS120/38



Contact us
Product Working Video


HDPE 710mm - 1200mm PE Pipe Extruder is mainly applied in Water and gas Supply Pipe. This production line can produce in the HDPE pipe with diameter of 710mm/1200mm, and also can be suitable for producing different pressure degree pipes ranged from SDR9-SDR26. This production line is consist of JWS90/38 or 120/38 single screw extruder, die-head, calibration tank, water tank, cooling tank, haul-off unit, cutter and stacker. In order to produce larger capacity, higher efficiency pipes, we also suggest our customers to equip the Gravimetric systems. After all these years development, we have made some modification for the main extruder, die head, calibration tank and cutter to create a better customer satisfaction.


HDPE Diameter of 710mm - 1200mm PE Pipe Extruder. Equipped with JWS90/38 or JWS 120/38 extruder with Siemens PLC control system and energy saving heating system. The motor can be ranged from 315kw-355w . The capacity is also ranged from 1000-1600kg per hour. We also provide two different gearbox for customers to make option. One is made in China best quality brand Guomao; another is Flender, made in Germany.

Jwell make the pipe molds by herself. For HDPE pipes, with special material mold 40Cr. Beside, we can also provide a complete spare parts service for mold including die pin, die bush, and calibration die. We also provide high quality and high speed calibration dies to meet different customer’s requirement.

Calibration tank:
Jwell designs high performance and energy calibration tank for customers. This calibration tank is 9 meter to make sure the pipes can be enough cooling and calibration. It can also be equipped with Frequency invertor to make energy saving, and low noise while the pump’s running. For Large diameter pipes extrusion line (630 and up), the calibration tank will be designed as two parts to make sure it has a better calibration effect.

Vacuum tank
Cooling tank:
The water mouth is specially designed inside the water tank. And the water can be spray on the pipes with 360 degree direction. The water mouth can also be adjustable to meet customer’s requirement. For high speed pipe extrusion line, we usually equipped 3 sets of water tanks.

cooling tank
Haul-off unit:
For 710mm - 1200mm PE Pipe Extruder, Jwell design eight caterpillar haul-off unit. Under the control of frequency invertor or servo motor control system, this haul-off unit can be synchronized with the main extruder to make sure this whole production line working smoothly.
haul off unitCutter:
Jwell design no-dust cutting system for this machine. Equipped with frequency invertor or servo motor system, the cutter can cut the pipes precisely. The cutting edge is also very smooth.

Stacker :
This Equipment is equipped pneumatic control system. 



As a tough and resilient material capable of lasting 100 years or more with minimal maintenance, HDPE pipe has proven to be superior to many other piping materials as a means transporting and distributing potable water. HDPE pipe’s long service life and low maintenance costs, coupled with its’ ability to be installed with a variety of trench-less technologies leads to HDPE pipe having the lowest life cycle costs of any potable water piping system. HDPE pipe is the ideal piping solution for public and private potable water systems. HDPE pipe features a service life of over 100 years and has the versatility to perform in a variety of conditions. HDPE pipe provides a logical, low-maintenance investment in municipal and private potable water applications.Contact us today to speak to a customer service representative about how HDPE water pipe could benefit your next project.

应用场景6    应用场景2    应用场景1



Competitive Advantage

Performance and advantage:
This production line adopts the most advanced technology of Europe. It is a new research achievement of energy-saving production line, which is suitable for high speed extrusion of HDPE,PP and other polyolefin pipe. Compared with common production line, the energy-saving effect reach on 35%, and the product efficiency increase more than 1 times, thus it is not only saving the cost of site and labor force, but also improving efficiency.
This production line has nice appearance, higher automagical degree ,production reliable and stable.

Packing & Shipping

All Jwell Machines will be packed by wooden pallet. For some important spare parts, we will pack with the wooden box. So that the machines and spare parts can arrive at Chinese customer safely. We kindly request our customer to buy the insurance before shipping the containers.

集装箱运输图片 (2)
集装箱运输图片 (4)

Q1: How can  I order and make payments?
A1: Once clear your requirements and determined extrusion line is ideal for you. We will send technical solutions and Proforma Invoice to you. You can pay via TT bank transfer, LC as you like.

Q2: If we find your bank account or email different as before, how should we respond?
A2:  Please don't send the payment and double check with us before arrange payment (Bank details will be listed in every piece of proforma invoice. ) 

Q3: How long is the delivery date?
A3: Usually it takes about 1 - 4 months depends on different machinery upon receipt of order advance payment.

Q4: What is your Minimum Order Quantity?
A4:  One. We provide both customized extrusion lines and technical solutions. Welcome contact with us for technical innovation or improvements for your future purchasing plan.   


Hot categories